Rule-mate Auto Bilge Pump -500
  • Rule-mate Auto Bilge Pump -500

Rule-mate Auto Bilge Pump -500


Print Page

£59.24
VAT included

The Rule-Mate consists of a powerful Rule Bilge Pump and a new non-mercury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises.

Quantity

  • Your payments are processed by PayPal & are 100% secure. Your payments are processed by PayPal & are 100% secure.
  • Delivery via Royal Mail or Hermes Courier Delivery via Royal Mail or Hermes Courier
PayPal

The Rule-Mate consists of a powerful Rule Bilge Pump and a new non-mercury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and no battery drain. The pump remains off until the internal float switch rises. The pump then stays on until all the water is evacuated. The pump's internal computer senses no load (water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for easy removal of any debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. 500GPH open flow rate 360GPH with 1m head 260GPH with 2m head 12 Volt operation 2.5Amp draw 2.5Amp fuse 19mm Discharge pipe 100mm High 125mm Wide 82mm Deep 450g in weight

Reviews

Write your review

Rule-mate Auto Bilge Pump -500

The Rule-Mate consists of a powerful Rule Bilge Pump and a new non-mercury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises.

Write your review